<div class="descr"> <ul class="red-list"> <li>VERSATILE & EASY TO USE</li> <li>PLA (polylactide) is a biodegradable thermoplastic polyester, which is easy to print for variety 3D printers.</li> <li>It has no odor, a lower melting point and good flowbility, no need to post-treatment</li> <li>The material is composed of PLA and ester</li> <li>The effect of "silk" on the surface</li> </ul> <table class="tbldata" width="100%"> <tbody> <tr> <td>Material: PLA, 1.75 mm diameter</td> </tr> <tr> <td>Weight: 1 kg/spool (2.2 lbs)</td> </tr> <tr> <td>Length: approx. 340 m</td> </tr> <tr> <td>Density at 21.5 °C: 1.21 g/cm3</td> </tr> <tr> <td>Melt Flow Index at 10min, 2.16kg: 6...8</td> </tr> <tr> <td>Melt Point: 190 - 220 °C</td> </tr> <tr> <td>Heat-Deflection-Temperature at 0.455 MPa: 50 °C</td> </tr> <tr> <td>Yield Strength at 5mm/min: > 30 MPa</td> </tr> <tr> <td>Impact Strength: 5 KJ/m2</td> </tr> <tr> <td>Tensile Break: 20 %</td> </tr> <tr> <td>Diameter: 1.75 ± 0.05 mm</td> </tr> <tr> <td>Spool dimensions: 200 mm diameter x 67 mm height x 60 mm central hole</td> </tr> </tbody> </table> </div> <div id="imgView"></div>